Industries

Residential and mixed-use acoustics

A residential building is somewhere people live, and they judge it by what they can hear: the suite next door, the corridor above, the building’s own equipment, the street. Ontario sets out much of the same thing in writing. The Building Code governs sound isolation between units, provincial guidelines cover noise from outside, and Tarion tests the finished suite before the warranty closes.

What comes up most

The feasibility study comes before the design.

A noise feasibility study is usually required while unit layouts, glazing and the mechanical concept are still provisional, and whatever it assumes becomes a condition of approval. Done early, with the massing still movable, it routinely gives scope back: fewer warning clauses, and air conditioning by choice rather than by condition.

Neighbour to neighbour is decided in the details.

Suite-to-suite sound, footfall from above, the corridor door. These are governed by details rather than ratings: how the partition meets the deck and the façade, what happens at the electrical boxes, how the floor assembly is actually built. The difference is almost always the junctions.

Amenity under bedrooms.

Gyms come up most. Dropped weights put impact energy straight into the structure, and it carries further than people expect. Resilient floor systems, isolated platforms and drop zones all work well, and can be added later if they are needed. Same conversation for pools and party rooms.

Mixed-use ground floors.

A restaurant or grocery at grade brings loading, refrigeration and kitchen exhaust into a building of homes, usually before the tenant is known. The base building carries assumptions about a use nobody has signed yet, which is worth setting deliberately while the shell is still being designed.

Rail, transit and road corridors.

Proximity brings vibration and ground-borne noise into scope alongside airborne sound, and the corridor owner’s adjacent development requirements sit on top of the provincial guideline. Those can reach the structure, so they are worth settling while the structural scheme is still open.

Class 4 noise areas and sites near existing industry

What it is.

Infill is increasingly proposed on land next to facilities that were there first. NPC-300 provides for a Class 4 area classification, applied by the land use planning authority to the proposed development, permitting higher sound level limits in exchange for mitigation, warning clauses and acknowledgement on title.

What it involves.

It needs the municipality’s agreement, it usually attracts a peer review, and the obligations carry on after occupancy. It also changes the position of the neighbouring facility. Whether to pursue it is a planning, legal and commercial decision as much as a technical one.

Tarion RB19 acoustic review and testing

What it covers.

For Type C and Type D condominium projects, Tarion’s Registrar Bulletin 19 treats acoustics as its own risk area, covering sound transmission between suites and between suites and interior common areas, including elevator and service shafts and amenity spaces, from design review through to field testing.

What the scope involves.

The acoustical consultant can review design documents, review construction and shop drawings against the acoustic requirements, attend mock-ups and carry out the field testing, reporting through the project’s Field Review Consultant. Worth settling early, because the requirements are built around the finished suite rather than the drawing set.

Our engineers’ experience

Residential is among the work Bentham’s engineers have done most of, across the full range of it: low-rise and stacked townhouses, purpose-built rental, high-rise and mixed-use towers, master-planned communities, and infill on constrained urban sites.

Some of that work:

Canada’s most complex residential structures.

Bentham’s engineers have worked on the tallest and most slender residential towers in the country, including Canada’s first supertall. At that slenderness the structure becomes the acoustic problem: transfer levels and mega columns running between suites, mechanical floors with residences above and below, and a hotel in the same stack as the condominium and the retail.

Mass timber.

Timber does not behave like concrete. A timber floor has a fraction of the mass of a slab, so impact noise and low frequency govern, and the connections that make the structure continuous also carry sound between suites. Bentham’s engineers have led research on flanking in mass timber and lightweight assemblies, and contribute to the international committee developing the standard flanking is measured against.

Podium levels, and what gets put in them.

The podium is where the unusual uses end up. Bentham’s engineers have worked on podiums carrying a school, a music venue, fitness facilities, restaurants and retail, and the tower’s mechanical plant, with the first suites directly above. A school is the hardest of those: a different schedule from the building above it, and a gymnasium and music rooms as its loudest spaces.

Class 4 area designations.

Where a development goes next to an industrial or entertainment use that was there first, a Class 4 designation allows higher sound limits in exchange for mitigation, warning clauses and acknowledgement on title. Bentham’s engineers have worked the zoning and implementation side of it, which sits with the municipality as much as with the design team.

Commissioning and Tarion compliance.

Bentham’s engineers have a strong record of residential projects clearing commissioning and Tarion testing without surprises. That comes from detailing coordinated with the design team, recommendations that can actually be built, and staying with the trades through installation.

Bentham Acoustics is new. Its engineers are not. The projects described here were carried out by Bentham engineers over their careers, at this firm and before it.

A full list of relevant project experience is available on request.

Standards and requirements in Ontario

The Ontario Building Code.

Sets sound isolation between dwelling units as an apparent sound transmission class, measured in the finished building rather than derived from the assembly, since January 1, 2020.

NPC-300.

Governs sound arriving from outside, setting indoor criteria for living and sleeping spaces, an outdoor criterion for amenity areas, and the area classifications.

Tarion.

The Construction Performance Guidelines set out what is treated as a warranted defect after closing.

Municipal conditions.

Site plan and draft plan conditions sit on top of all of it, and warning clause wording is frequently prescribed locally.