Industries

Transportation noise and vibration

Transportation infrastructure is what makes a region work. Highways, rail, transit and airports move the people and goods an economy runs on, and these projects need to get built. The case for them is rarely the hard part. How they sit alongside the places they run through is.

Noise and vibration is usually where that gets settled: whether a project is approved, what mitigation it carries, and what can be built beside it afterward. A conservative prediction builds barriers that were never needed or writes off land that could have been developed. An optimistic one gets caught at review.

What we work on

Both sides of the corridor.

What a new or expanded transportation facility does to its neighbours, and what an existing one does to a proposed building. The methods are shared, the interests are not, and having worked from both positions is what makes an assessment hard to argue with.

Rail noise and vibration together.

Vibration reaches buildings that look far enough from the tracks, and it is the one most often picked up late. Assessed alongside the noise, the mitigation gets designed into the structure instead of retrofitted into a building that is already priced.

Aircraft noise and NEF contours.

Noise Exposure Forecast contours are developed for airport operators, and development on the land those contours affect is assessed against them. The contour governs what can be approved around an airport for years.

Mitigation decided on evidence.

Mitigation is triggered by thresholds, and whether a receptor clears them is a modelling result. Accurate prediction is the difference between a project that carries barrier cost and one that does not.

Land that stays developable.

Coarse assumptions sterilise property unnecessarily. A detailed assessment often shows that a site written off on a screening can be built, with mitigation that is proportionate rather than defensive.

One team from assessment to opening.

These projects run for years and the assessment is revisited at every stage. Carrying it through design, construction monitoring and post-construction measurement means the assumptions are not relitigated by someone new each time.

Our engineers’ experience

Bentham’s engineers have worked as acoustical consultants on transportation projects on both sides of the corridor, principally in Ontario and with road traffic noise work in British Columbia, Saskatchewan and Quebec: provincial highways, municipal and regional roads, rail and transit corridors and stations, and airports, alongside the developments those corridors affect.

Some of that work:

Highway widenings, and the barriers.

On the agency side that has meant widenings of provincial highways across Ontario: predicting future traffic noise at adjacent homes, assessing the need for mitigation under the MTO and MECP guidelines, and designing the barriers. Location, height and extent have to deliver the guideline levels while remaining buildable.

Stations are a different problem from corridors.

Preliminary design work on deep subway stations turned on speech intelligibility from the public address system in very large volumes, where the reverberant field, not the equipment, decides whether an emergency announcement can be understood.

The construction phase.

Road projects bring heavy equipment, compaction and night work close to homes and to structures that may not tolerate it. Construction noise and vibration studies predict the impacts, set the limits and the monitoring, and recommend measures that let the work proceed, so the contractor knows where the line is while there is still time to change method.

Bentham Acoustics is new. Its engineers are not. The projects described here were carried out by Bentham engineers over their careers, at this firm and before it.

A full list of relevant project experience is available on request.

Standards and requirements in Ontario

Road, rail and transit.

Road projects are assessed under the MTO Environmental Guide for Noise. Rail is assessed under the FCM/RAC Guidelines for New Development in Proximity to Railway Operations, which set the study triggers and the criteria. Transit projects follow the requirements the corridor owner applies.

Aircraft.

Transport Canada publication TP 1247 and the Noise Exposure Forecast system. New residential development is not considered compatible at NEF 30 and above, a threshold carried directly into Ontario’s planning system.

Construction.

Construction noise falls under MECP publications NPC-115 and NPC-118 and municipal by-laws, and construction vibration under municipal by-laws.

New development near corridors.

Noise is assessed under MECP publication NPC-300. Vibration is not covered by NPC-300, and for development near rail the criterion comes from the FCM/RAC guidelines.